qd story
Skin Booster by Skin Concern: Rejuran, Juvelook or Re2O?
Published: 2026-11-16
Choose between Rejuran, Juvelook and Re2O by your biggest skin concern right now, not by how popular a product is. Rejuran Healer uses salmon DNA-derived polynucleotide (PN), Juvelook Skin PDLLA (poly-D,L-lactic acid) with hyaluronic acid (HA), and Re2O human acellular dermal matrix (hADM), dermis with the cells removed.
If texture and fine lines across the whole face are the focus, we start with Rejuran Healer or Juvelook Skin; if pores and shallow unevenness are the focus, Juvelook Skin; and if thinning skin and lost firmness are the focus, we discuss Re2O first. If sagging is the main cause, a lifting device may need to come before a skin booster.
At a glance
- Dry, dull skin: we first compare Rejuran Healer, a PN product, and Rejuran HB, which adds hyaluronic acid.
- Pores, texture and shallow unevenness: we first discuss Juvelook Skin (PDLLA 42.5mg + HA 7.5mg according to the manufacturer).
- Thin, crinkly skin: we first discuss Re2O, which delivers a dermal matrix made of about 80% collagen and 3% elastin.
- The usual schedules are Rejuran Healer 3–4 sessions 2–4 weeks apart and Re2O 2–3 sessions 4–6 weeks apart (QD Clinic standard), and Juvelook Skin 3 sessions about 6 weeks apart (manufacturer guidance).
- All three are injections that work on the quality of the skin itself, which is a different goal from lifting, which raises loose tissue.
What kind of skin booster is each of Rejuran, Juvelook and Re2O?
All three are placed in the dermis, but the material injected and what that material does in the skin differ. Knowing this difference first makes it easier to understand how we choose by concern.
| Item | Rejuran Healer | Juvelook Skin | Re2O |
|---|---|---|---|
| Manufacturer | PharmaResearch | VAIM | L&C Bio |
| Main ingredient | PN derived from salmon DNA, no hyaluronic acid | PDLLA 42.5mg + HA 7.5mg | Particulated human acellular dermal matrix (hADM) 150mg |
| Source of material | Biological (salmon) | Synthetic polymer + HA | Human tissue (donated dermis) |
| How it is described to work | Described as forming a water-holding scaffold that supports tissue recovery and hydration | PDLLA gradually prompts collagen production; HA gives early hydration | Ready-formed matrix serves as a scaffold inside the dermis |
| Usual sessions | 3–4 sessions, 2–4 weeks apart (QD Clinic) | 3 sessions, about 6 weeks apart (manufacturer) | 2–3 sessions, 4–6 weeks apart (QD Clinic) |
| Concerns mainly discussed | Overall facial texture, hydration and fine lines | Pores, fine lines and texture | Thin, crinkly skin and loss of firmness |
Rejuran Healer is the basic formulation of the Rejuran line and contains PN only, while Rejuran HB from the same line adds hyaluronic acid and the local anesthetic lidocaine to PN. Juvelook combines PDLLA microparticles and non-crosslinked hyaluronic acid in one formulation, and for hollowing in deeper layers, Juvelook Volume, with higher amounts (PDLLA 170mg + HA 30mg), is used. Re2O is a human tissue product regulated by Korea's Ministry of Food and Drug Safety (MFDS): the cellular components are removed from donated dermis, and only the extracellular matrix (ECM), such as collagen and elastin, is kept and made into particles.
In short, Rejuran supports the skin's recovery environment, Juvelook leads the skin to make collagen gradually, and Re2O places ready-formed dermal matrix directly. None of them ranks above the others; they are options for different concerns.
Which skin booster do you choose for which skin concern?
Even concerns that look alike call for different products when the cause differs. In the consultation room, we first sort out the cause and then decide on the product.
If your skin is dry and dull
If the whole face is dry and the texture is rough, we first compare Rejuran Healer and Rejuran HB. At QD Clinic, Rejuran HB is a formulation often used for dry or dehydrated skin, and thanks to the hyaluronic acid it contains, many people feel hydration early. A 2025 systematic review gathered 9 studies of PN injections (219 people) and summarized that improvements in wrinkles, texture and elasticity were reported and that side effects were generally mild and temporary. If the dryness comes from a damaged skin barrier caused by cleansing or exfoliating habits, we look at those habits as well.
If your pores look enlarged and your texture is rough
If pores look stretched because elasticity has dropped, we first discuss Juvelook Skin. The American Academy of Dermatology (AAD) explains that pores expand when they clog, and that they look larger with excess sebum or when sun damage and aging reduce elasticity. So if sebum and clogging are the main cause, cleansing and exfoliation come first. Juvelook Skin works on the texture and elasticity around the pores; it does not shrink the pores themselves.
If your skin has become thin and less firm
If your skin is thin and crinkly and feels less firm to the touch, we discuss Re2O first. In a randomized split-face trial in 20 adults with rough cheek texture, the side injected with Re2O mixed with hyaluronic acid showed greater improvement in skin density, elasticity, wrinkle depth and pore area than the side given hyaluronic acid alone. The trial followed participants for 20 weeks. If you prefer to avoid human tissue products, we can also discuss Rejuran or Juvelook, which do not use human tissue.
If fine lines are your concern
For fine lines spread evenly across the whole face, Rejuran Healer or Juvelook Skin is often the starting point. If texture and hydration are also a concern, we lean toward Rejuran; if loss of elasticity and pores are also visible, toward Juvelook Skin. Expression lines that deepen only when you smile or frown come from muscle movement and are not what skin boosters aim to treat, so we also compare other methods such as Botox.
If you have acne scars and uneven skin
For shallow, depressed scars and uneven skin, we consider Juvelook Skin or Re2O. The manufacturer lists acne scars among the uses of Juvelook, and at QD Clinic, Re2O is a product we also use for uneven texture and shallow, depressed scars. PN injections such as Rejuran are also used for scar management: in a 2026 survey of 501 dermatology physicians belonging to the Korean Association for Anti-Aging Dermatology (KAAD), 73% said they use PN for scar management. Deep or wide scars are hard to treat with injections alone, so at QD Clinic we first look at the shape and depth of the scars and compare which option fits your goal: injections such as Juvelook Skin or Re2O, volume restoration or Potenza treatment.
If your cheeks or temples look hollow
If hollowing rather than texture is your concern, we compare Juvelook Volume, which is placed in the deep dermis and subcutaneous layer, or a hyaluronic acid filler, rather than Juvelook Skin. If the hollow look comes from sagging or a shift in fat position, adding volume may not change it as much as you expect, so we sort out the cause first.
| Main concern | Cause we sort out first | Product discussed first | Method that may come before a skin booster |
|---|---|---|---|
| Dryness and dullness | Barrier damage, lifestyle habits | Rejuran Healer, Rejuran HB | Adjusting cleansing and moisturizing habits |
| Enlarged-looking pores | Sebum and clogging, or loss of elasticity | Juvelook Skin | Cleansing and exfoliation if sebum and clogging are the cause |
| Thin, crinkly skin | Skin thickness, whether sagging is also present | Re2O | A lifting device if sagging is significant |
| Fine lines | Dryness and loss of elasticity, or expression lines | Rejuran Healer, Juvelook Skin | Botox for expression lines |
| Shallow scars and unevenness | Depth and shape of the scars | Juvelook Skin, Re2O | An energy-based treatment such as Potenza for deep scars |
| Hollow cheeks or temples | Volume loss, or sagging | Juvelook Volume | An HA filler if immediate correction is needed |
When do results appear, and how many sessions do you need?
With all three products, change builds up over several weeks rather than appearing all at once. Products containing hyaluronic acid (Juvelook, Rejuran HB) may give a sense of hydration early, but the collagen change led by PDLLA and the change as Re2O matrix settles in are checked over several weeks to several months. The Re2O clinical trial took measurements from 1 week to 20 weeks after injection, and at QD Clinic we usually review the result together at around 4–8 weeks. Tightness right after treatment may be swelling, so we do not treat it as the result.
At QD Clinic, the usual schedule is 3–4 sessions of Rejuran Healer 2–4 weeks apart and 2–3 sessions of Re2O 4–6 weeks apart. For Juvelook, as the manufacturer's FAQ advises, we usually do 3 sessions, about 6 weeks apart for Juvelook and about 8 weeks apart for Juvelook Volume. In a survey of 235 Korean dermatology physicians (2024), the most common recommendation for PN injections was also 3 sessions 4 weeks apart. The doctor adjusts the actual number and interval after seeing how your skin responds to the first session.
How long results last varies with age, skin condition and lifestyle, so the timing of the next session is decided by following your progress after treatment. The American Academy of Dermatology (AAD) explains that the more UV damage builds up, the more firmness the skin loses, so please keep up sun protection consistently in daily life.
How painful is it?
All three are injections given in small portions at many points with a fine needle, so you feel stinging and pressure. How much it hurts depends on the skin thickness of the area, the number of injection points and your own sensitivity, and it is felt more where the skin is thin. At QD Clinic, we apply numbing cream before starting with all three products.
The formulations also differ. Rejuran Healer contains no anesthetic, while Rejuran HB includes lidocaine in the formulation to reduce discomfort during injection. Even so, HB does not take away injection pain. In the Re2O clinical trial, Re2O was mixed with hyaluronic acid, saline and lidocaine and injected into the mid-dermis. If you are worried about pain, please tell us in advance. We can allow more numbing time or discuss the formulation with you.
What are the procedure and recovery like?
At QD Clinic, treatment proceeds in this order: consultation and skin assessment, cleansing and numbing cream, injections given in small portions with a fine needle, and cooling and soothing. One session takes about 20–40 minutes including numbing. The reactions commonly seen during recovery are as follows.
- Small raised bumps at the injection points (embossing): with Rejuran they usually settle within 1–2 days, and with Re2O usually within 2–3 days. In a 15-person split-face study, the rate at which embossing was observed on the side treated with a conventional PN formulation was 56.7%.
- Juvelook: small nodules or bumps can form at the injection points and usually settle within 1–2 days.
- All products: redness, mild swelling, tenderness when pressed, small bruises
Injection marks and swelling usually settle within a few days, but bruising can last longer, so if you have a photo shoot or an important appointment, it is best to allow about a week.
What should you be careful about after treatment?
For the first few days, the basic rule is not to add heat or irritation to the injected area. Product-specific advice is as follows.
- Rejuran: the Korean instructions for use advise avoiding makeup for 12 hours after injection and avoiding long exposure to sunlight, UV, cold and heat (sauna, jjimjilbang (Korean bathhouse) and the like) for 2 weeks.
- Juvelook: the manufacturer's FAQ recommends avoiding strenuous exercise, saunas, hot baths and alcohol for a while after treatment.
- Re2O: at QD Clinic, we advise avoiding saunas, strenuous exercise and alcohol on the day.
- Massage: do not massage unless you have been specifically told to. A guideline on managing PDLLA nodules notes that massage or muscle movement after treatment can be a factor in the product shifting.
- Keep up sun protection and moisturizing as usual. Pause harsh exfoliation and acid-based products for a few days.
Side effects and what to tell us before treatment
The materials differ, but the risks shared by all injected treatments are the same. The US FDA lists bruising, redness, swelling, pain, tenderness, itching and rash as common risks of injectable fillers, and names accidental entry of the material into a blood vessel as the most concerning risk. This can lead to skin necrosis, vision problems or blindness, and infection and nodules or granulomas are also reported rarely.
Some points are specific to each product. The Rejuran instructions for use state that applying pressure to the injection site can cause inflammatory reactions such as redness, swelling and erythema, which can last for about 1 week, and that nodules, hardening or discoloration can occur. The PDLLA in Juvelook cannot be removed right away with a dissolving injection the way a hyaluronic acid filler can, and a 2025 guideline on managing nodules explains that they can appear at various times, from inflammatory or infectious nodules within days to weeks, to delayed hypersensitivity reactions 3 months to years later, to granulomas 6–24 months later. Because Re2O is made from human tissue, we go over your allergy and immune-related history before treatment.
If pain keeps getting worse, the skin turns pale or blotchy, or your vision becomes blurred, do not wait for your appointment; seek medical care right away. Please also contact us right away if redness and swelling last more than 1 week, or if a lump you can feel grows or becomes painful weeks later.
Please tell us before treatment if any of the following apply. If so, we decide separately whether and when to treat.
- You are pregnant or breastfeeding
- Infection, inflammation or an open wound in the treatment area, or a history of herpes (cold sores)
- A history of allergies. Rejuran is derived from salmon and Re2O from human tissue.
- A tendency to keloids or granulomas, or wounds that heal poorly
- Autoimmune disease, or taking anti-inflammatory painkillers (NSAIDs), antiplatelet drugs, anticoagulants or immunosuppressants
- Fillers, injections or energy-based treatments in the same area recently, and the type of product used
How do skin boosters differ from lifting?
Skin boosters place material in the dermis to work on the texture, thickness and elasticity of the skin itself, while lifting devices use energy to deliver heat to the tissue beneath the skin and work on sagging. So the concern "my skin is rough and thin" and the concern "my jawline has dropped" have different starting points.
The two approaches are often planned together rather than competing. In a survey of Korean dermatology physicians, 79% of PN users said they combine it with device treatments, and the devices most often combined were radiofrequency and high-intensity focused ultrasound (HIFU). Whether to do them on the same day or on separate days is decided by the area and the recovery burden. Adding strong heat right onto injected areas raises the risk of swelling and inflammation, so we often recommend leaving a few days between them.
At QD Clinic
At QD Clinic, Rejuran, Juvelook and Re2O are our main skin booster treatments, and we also offer lifting treatments such as Ultherapy PRIME, Thermage FLX, Sofwave and ONDA lifting. At consultation, we use QD Lumora, the AI skin analysis system we developed ourselves, to organize items such as pores, sebum, wrinkles and skin tone from captured images and review them with you; these results are used as consultation support, not as a diagnosis. The doctor then directly examines skin thickness, texture and pores, elasticity, the balance of hollowing and sagging, and your treatment history, and decides the product, the injection depth and whether lifting should come first.
QD Clinic is at 3F, 502 Gangnam-daero, Gangnam-gu, Seoul (Nonhyeon-dong, Seohee Building), a 4-minute walk from Exit 3 of Nonhyeon / Sinnonhyeon Station. Opening hours are Mon, Wed and Fri 10:00–19:00, Tue and Thu 10:00–20:00, and Sat and Sun 10:00–16:00, and parking and valet parking are available.
Frequently asked questions
If it is my first skin booster, where do I start?
It depends on your main concern. If your concern is texture and fine lines spread evenly across the whole face, we often start with Rejuran Healer; if pores or shallow scars are the focus, Juvelook Skin; and if thinning skin is the focus, we discuss Re2O first.
Re2O is a newer product. Does that mean it works better?
Being new does not make it better. Re2O uses a different material, a ready-formed dermal matrix, and it is an option suited to thinning skin. If texture and hydration are your main concern, Rejuran may suit you better.
Can I have all three products on the same day?
Sometimes different areas are treated on the same day. In that case we set the area, order and amount one by one, and if swelling or a nodule remains where a product was injected earlier, we postpone further injection.
From what age should I have it?
Skin condition matters more than age. Even in your 20s, acne scars or fine lines can be a concern, and even in your 50s, lifting may come first if sagging is the main cause. The Rejuran instructions for use list minors as a contraindication.
Will one session make a difference?
Some people feel a change in hydration or texture after one session, but for all three products we generally plan several sessions as a set. This is because the material needs time to settle and the skin needs time to respond.
I had filler recently. Can I still have it?
The Rejuran instructions for use say it should not be used in areas treated with non-absorbable fillers or in areas that recently received filler. If you tell us when, where and what filler you had, we will set the area and timing accordingly.
Does more embossing mean a better result?
Embossing is the injected solution before it has spread, so it does not show how large the effect will be. Results are judged by comparing under the same conditions after the swelling has gone down.
References
- PharmaResearch, Instructions for use for Rejuran, Rejuran i and Rejuran S (Korean and English, 2024)
- PharmaResearch, Instructions for use for Rejuran HB (2023)
- Lampridou S et al., The Effectiveness of Polynucleotides in Esthetic Medicine: A Systematic Review, J Cosmet Dermatol, 2025
- Rho NK et al., Expert Perspectives: Evidence-Based Applications of Polynucleotides in Aesthetic Medicine and Dermatology, 2026
- Rho NK et al., A survey on the cosmetic use of injectable polynucleotide, J Cosmet Dermatol, 2024
- Rho NK et al., Real-World Use of Polynucleotide Injections in Scar Prevention and Management, J Cosmet Dermatol, 2026
- Jeon W et al., Efficacy of Ionization-Adjusted PN Filler in Minimizing Injection Pain, Aesthetic Plast Surg, 2026
- VAIM, JUVELOOK official site (product composition)
- VAIM, JUVELOOK product information
- VAIM, JUVELOOK FAQ
- Magacho-Vieira FN, Ducati EPJ, Clinical Management of Poly-D,L-Lactic Acid Nodules: A Guideline With Diagnostic and Treatment Flowchart, J Cosmet Dermatol, 2025
- L&C Bio, Re2O product information (manufacturer's official site)
- Lee YI et al., Injectable Particulated Human Acellular Dermal Matrix Booster for Skin Restoration, Int J Mol Sci, 2026
- Full text of the same paper (PubMed Central)
- ClinicalTrials.gov, NCT07155278
- U.S. FDA, Dermal Fillers (Soft Tissue Fillers)
- American Academy of Dermatology, How to treat large pores

